Welcome to LAIWU HULIN WELDING MATERIAL CO.,LTD.!
 

Smelting flux

HJ431


详细

Name of Item:  High Manganese-oxide Fused flux LHHJ431 

Executed Standards:  AWS A5.17 F6AZ-EL12; JIS YSF42-W11 

Specification of Fused Flux:
Flux LHHJ431, it is a kind of high-Manganese oxide fused flux with glass granule red-brown to light yellow, grain

size of 2.5mm~0.45mm (8~40 mesh). The flux is good at welding and weld-ability.  It is suitable for the welding

polarity with AC or DCEP.

Application of Flux:
For the combination with welding wire H08A, H08MnA, H10Mn2, this fused flux is designed for welding low alloy high-

strength steel ( such as 16Mn, 15MnV steel etc )
and the important steel structures, the fabrication of ships, boilers and pressure vessels etc.

The chemical component of welding flux ( %): 
MnO+ Al2O3: 39.42 %;  SiO2+TiO: 43.51%; CaF2+FeO: 5.36%;
CaO+ MgO: 9.15%;    S : 0.05 Max;      P: 0.04Max;

Mechanical properties of deposited metal(F4A0-H08A);
Yield strength σs (MPa):≥330 
Tensile strength(σb)(Mpa):415-- 550 
Elongation (δs)%: ≥22 
Impact Akv ( J ) ( ℃ )  0℃ : ≥27 ;    
Tested and combination With welding wire H08A (AWS EL8): 
Yield strengthσs (MPa):         360; 
Tensile strength (σb)(Mpa):  463; 
Elongation  (δs)%:         31.20;  
Impact Akv ( J ) ( ℃ )  0℃:    63;   

The instruction of usage:
Redried the flux at 300℃ ~ 400℃for 2 hours before use.
Remove the rust,oil and dirt from the surface of welding groove;
 


<< Next:HJ350 Page >>:Period!  
 

Print this page || Close this page